Configure Snmp Syslocation - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

configure snmp sysLocation

configure snmp syslocation <alphanumeric string>
Description
Configures the location of the switch.
Syntax Description
alphanumeric string Specifies the switch location.
Default
N/A.
Usage Guidelines
Use this command to indicate the location of the switch. A maximum of 255 characters is allowed.
To view the location of the switch on the switch, use the command. The
show switch show switch
command displays switch statistics including the location of the switch.
To restore defaults to all SNMP-related entries, including the SNMP parameters modified using the
command, use the
configure snmp syslocation <alphanumeric string> unconfigure
command.
management
Example
The following command configures a switch location name on the system:
configure snmp syslocation englab
History
This command was first available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in 7.1e.
Platform Availability
This command is available on all platforms.
140 ExtremeWare 7.5 Command Reference Guide