Configuring Offset Points - Leica TPS1200 series Technical Reference Manual

48.4.2
Access step-by-step
SURVEY
Auto Points - Offset,
General page
Survey - Auto Points

Configuring Offset Points

Step Description
1. Refer to "47.2 Surveying Points" to access SURVEY Survey: Job Name.
2. PAGE (F6) until the Auto page is active.
3. OFST1 (F4) or OFST2 (F5) to access SURVEY Auto Points - Offset.
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
OFST2 (F2) and OFST1 (F2)
To switch between configuring offset point type
one and two.
PAGE (F6)
To change to another page on this screen.
TPS1200 1225