Paddle Position Failure Rap - Xerox WorkCentre 5687 Series Service Manual

11-024-130, 11-025-130 Paddle Position Failure RAP

11-024-130 The paddle is not at the home position.
11-025-130 The paddle fails to rotate.
NOTE: The home position of the paddle is when the sensor flag is located between the sensor
jaws.
Initial Actions
Check for damage or obstructions that would prevent the paddle from rotating. If necessary,
install a new compiler carriage assembly, PL 11.46 Item 1.
Procedure
NOTE: All HCSS interlocks must be made to supply +24V to the motors.
Enter dC330, codes 11-025, paddle roll motor run and 11-024 paddle roll motor home. Check
the movement of the paddle. The paddle roll rotates.
Y N
Go to Flag 2 and Flag 4. Check the paddle roll motor, MOT11-024.
Refer to:
• GP 10, How to Check a Motor.
• P/J406, P/J401, Carriage PWB.
• P/J428, HCSS PWB.
• 11C-130 HCSS Power Distribution RAP.
Install new components as necessary:
• Carriage PWB, PL 11.46 Item 5.
• Paddle roll motor assembly, PL 11.47 Item 8.
Enter dC330, code 11-326, actuate the paddle roll home sensor, Q11-326, Figure 1. The dis-
play changes.
Y N
Go to Flag 1 and Flag 3, check the sensor Q11-326.
Refer to:
• GP 11 How to Check a Sensor.
• P/J409 and P/J411, Carriage PWB.
• P/J423, HCSS PWB.
• 11C-130 HCSS Power Distribution RAP.
Install new components as necessary:
• Carriage PWB, PL 11.46 Item 5.
• HCSS PWB, PL 11.56 Item 5.
• Paddle roll home sensor, PL 11.47 Item 9.
Perform SCP 6 Final Actions.
Status Indicator RAPs
11-024-130, 11-025-130
Compiler carriage assembly
Figure 1 Component location
August 2007
2-382
Paddle roll motor,
MOT11-024
Paddle roll home
sensor, Q11-326
WorkCentre 5687 Family