CLUTCH MASTER CYLINDER
Removal and Installation
1. Drain the clutch fluid.
2. Pull out the snap pin and clevis pin from the clutch pedal
connection.
3. Remove the clutch tube.
Installation Notice
Tightening torque
Notice
Be careful not to contact the fluid into a painted
surface.
4. Remove the master cylinder mounting nuts and pull off
the master cylinder.
Installation Notice
Tightening torque
5. Install in the reverse order of removal.
6. Check the clutch pedal operation.
7. Bleed the clutch system.
CLUTCH
REXTON SM - 2004.4
15 ~ 18 Nm
8 ~ 18 Nm
3C-11
Y220_03C016
Y220_03C017
Y220_03C018
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN