Related
default-metric
Commands
redistribute command.
distribute-list in
Configure a filter for incoming routing updates.
C9000 Series
Syntax
distribute-list prefix-list-name in [interface]
To delete the filter, use the no distribute-list prefix-list-name in
command.
Parameters
prefix-list-name
interface
Defaults
Not configured.
Command Modes
ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.29.0
8.3.11.1
8.5.1.0
— assigns one distance metric to all routes learned using the
Enter the name of a configured prefix list.
(OPTIONAL) Identifies the interface type slot/port as one of the
following:
•
For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 4096.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
•
For a VLAN, enter the keyword vlan then a number from 1
to 4094.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Routing Information Protocol (RIP)
1890