Redistribute - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
7.8.1.0
7.6.1.0
6.2.1.1
Usage Information Although the passive interface does not send or receive routing updates, the network
on that interface still includes in RIP updates sent using other interfaces.
Related
neighbor
Commands
network

redistribute

Redistribute information from other routing instances.
C9000 Series
Syntax
redistribute {connected | static}
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
connected
static
Defaults Not configured.
Command Modes ROUTER RIP
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— enables RIP for a specified network.
— defines a neighbor.
Enter the keyword connected to specify that information from
active routes on interfaces is redistributed.
Enter the keyword static to specify that information from
static routes is redistributed.
Routing Information Protocol (RIP) 1902