Rmon Collection Statistics - Dell C9000 Series Reference Manual

owner name
buckets number
interval seconds
Defaults none
Command Modes CONFIGURATION INTERFACE (config-if)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0

rmon collection statistics

Enable RMON MIB statistics collection on an interface.
C9000 Series
Syntax
rmon collection statistics {controlEntry integer} [owner name]
To remove RMON MIB statistics collection on an interface, use the no rmon
collection statistics {controlEntry integer} command.
(OPTIONAL) Enter the keyword owner then the owner name to
record the owner of the RMON group of statistics.
(OPTIONAL) Enter the keyword buckets then the number of
buckets for the RMON collection history group of statistics. The
bucket range is from 1 to 1000. The default is 50.
(OPTIONAL) Enter the keyword interval then the number of
seconds in each polling cycle. The range is from 5 to 3600
seconds. The default is 1800 seconds.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Remote Monitoring (RMON) 1868