Ip-Bs Data Assignment; Default Password Is “Ipbsmnt” - NEC Univerge sv8500 Manual

1.4 IP-BS Data Assignment

"DRS (Device Registration Server)" used in this section refers to the Telephony Server. When IP-BS com-
Note:
municates with the Telephony Server, the Telephony Server acts as DRS, which is controlling function of
the Telephony Server.
• IP Address, Default Gateway, Related DRS
Default setting of IP-BS is to retrieve the necessary data from DHCP server. When not using DHCP server,
connect a PC to IP-BS via LAN or directly as shown below.
• Connecting a PC with IP-BS
To set the necessary data via a PC, use one of the following.
• Login
To make a connection, activate communication software such as telnet in the PC, and specify IP ad-
dress and port number. The ways of specifying port number and IP address depend on the software to
be used.
Example:
IP Address: 192.168.0.100
Port Number: 5000
192.168.0.100 is default IP address.
Note 1:
>telnet 192.168.0.100 5000
Enter a password (
with asterisk (*). If a wrong password is entered, the system disconnects you automatically.
Default password is "iPbSmNt".
Note 1:
Connecting a PC to IP-BS with a LAN cable.
IP-BS
LAN Cable
(10BASE-T/100BASE-TX straight-through)
Connecting a PC to the IP-BS through the LAN
LAN
IP-BS
Note 1
) in the following message. The entered password on the screen is displayed
Note 1
VOL.2-7
IP-BS (BS301)
PC
PC