NEC Univerge sv8500 Manual page 1787

When adjusting PAD value according to the configuration data setting.
MG(SIP) > set softdsp
<< Current Setting >>
codec convert mode ： disable
PAD setting
Select the PCM codec convert mode
according to SIP side.
0 = disable (default)
1 = PCMU
2 = PCMA
Input ： 1
Select the PAD setting for voice/FAX.
0 = disable (default)
1 = local setting
2 = auto
Input ： 1
Input PAD reception setting for voice.
[-20 (dB) - 20 (dB) ]
Input PAD transmission setting for voice.
[-20 (dB) - 20 (dB ) ] : 20
Input PAD reception setting for FAX.
[-20 (dB) - 20 (dB) ]
Input PAD transmission setting for FAX.
[-20 (dB) - 20 (dB) ]
μ
Note:
The A-law /
value adjusting feature.
： disable
: -20
: -20
： 20
-law converting feature setting is also needed to be assigned when enabling the PAD
VOL.2-1534
MG-SIP128 [MG-128SIPMGJ]
Displays the current setting.
0: Disabled (default)
1: μ-law
2: Α-law
Select the settings for PAD value adjusting.
0: Disable PAD value adjusting feature
1: Adjusting PAD value according to the con-
figuration data setting
2: Adjusting PAD value according to the set-
tings on the Telephony Server.
Assign PAD value for each setting.