NEC Univerge sv8500 Manual page 1781

Select SIP server Router type.
0=Strict(default)
1=Loose
Input:0
Input Domain Name.(default=0,
MAX128(strings))
When FQDN (=1) is selected:
MG(SIP) > set sip_server
Select SIP server type.
0=IPAddress(default)
1=FQDN
Input:1
Input Fully Qualified Domain Name.(default=0,
MAX63(strings))
Input SIP server Port Number.
(1024-65535(default=5060)):5060
Select SIP server Router type.
0=Strict(default)
1=Loose
Input:0
Input Domain Name.(default=0,
MAX128(strings))
Note: The conditions of this command are as follows.
• Pressing the Enter key can skip the item, with exceptions of "SIP server type" and "IPaddress/FQDN".
• Be sure not to enter a blank character to the end of the FQDN (with the Copy and Paste features of your
personal computer), and be careful not to mistype a character. ("0"(zero) or "O" (alphabetical O), for ex-
ample.)
(54) sip_tel_service
Setting of additional services
The command is used to enable/disable the use of additional service features (Hold/Retrieve/Transfer
from the SIP network side terminal).
VOL.2-1528
MG-SIP128 [MG-128SIPMGJ]
Select a Strict router or Loose router for
the proxy server
(Default: 0)
0: Strict router
1: Loose router
Select "0".
Input a SIP domain name in maximum
of 128 characters.
When FQDN (=1) is selected.
Assign the FQDN of the proxy server
in maximum of 63 characters
(default: 0).
Assign the port number of the proxy
server
(Default: 5060)
Select a Strict router or Loose router for
the proxy server
(Default: 0)
0: Strict router
1: Loose router
Select "0".
Input a SIP domain name in maximum
of 128 characters.