NEC Univerge sv8500 Manual page 1798

Forced mode
set prack:
Supported 100rel
Stop cyclical-send of 18x
-------------------------------------------------
set cdn_pattern:
Prior Called Party Number pattern:To[userinfo]
-------------------------------------------------
set sip_port_no:
SIP Port Number
-------------------------------------------------
Does it display more? Y/N=y
-------------------------------------------------
set 184ToPrivacy:
184 to privacy pattern
-------------------------------------------------
set slipresp:
:disable
:enable
:disable
:5060
:disable
VOL.2-1545
MG-SIP128 [MG-128SIPMGJ]
When "enable" is selected for
"Forced mode" by the SET com-
mand "session_timer", "enable" is
displayed.
When "disable" is selected by the
SET command "prack", "disable"
is displayed.
"enable" may be displayed
according to the setting.
When "set prack" is disabled,
nothing is displayed.
When "Request-URI[isub]" is
selected by the SET command
"cdn_pattern", "Request-
URI[isub]" is displayed, and when
"Request-URI[userinfo]" is
selected, "Request-URI[userinfo]"
is displayed, and "P-Called-Party-
ID" is selected, "P-Called-Party-
ID" is displayed.
When "Pattern 1" is selected by
the SET command
"184toprivacy", "Pattern 1" is dis-
played, and when "Pattern 2" is
selected, "Pattern 2" is displayed.