show ntp server status
Displays the basic server information for a specific NTP server or a list of NTP servers.
show ntp server status [ip_address | domain_name]
Syntax Definitions
ip_address
domain_name
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
This command displays a selected server or a list of servers with which the NTP client synchronizes.
•
To display a specific server, enter the command with the server's IP address or domain name. To
display all servers, enter the command with no server IP address.
Examples
-> show ntp server status
-> show ntp server status 198.206.181.139
IP address
Host mode
Peer mode
Prefer
Version
Key
Stratum
Minpoll
Maxpoll
Delay
Offset
Dispersion
Root distance
Precision
Reference IP
Status
Uptime count
Reachability
Unreachable count
Stats reset count
Packets sent
Packets received
Duplicate packets
page 5-16
The IP address of the NTP server to be displayed.
The domain name of the server to be displayed. This is usually a text
string.
= 198.206.181.139,
= client,
= server,
= no,
= 4,
= 0,
= 2,
= 6 (64 seconds),
= 10 (1024 seconds),
= 0.016 seconds,
= -180.232 seconds,
= 7.945 seconds
= 0.026,
= -14,
= 209.81.9.7,
= configured : reachable : rejected,
= 1742 seconds,
= 1,
= 0,
= 1680 seconds,
= 1,
= 1,
= 0,
Network Time Protocol Commands
OmniSwitch 6250 CLI Reference Guide
November 2009