Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 464

Release History
Release 6.6.1; command was introduced.
Related Commands
bridge mode
bridge priority
bridge msti priority
bridge 1x1 protocol
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsPriority
vStpInsBridgeAddress
page 16-24
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for changing the Spanning Tree priority for the flat
mode CIST instance or a 1x1 mode VLAN instance.
Explicit command for changing the Spanning Tree priority for an MSTI
when the switch is operating in either the flat or 1x1 mode.
Explicit command for changing the Spanning Tree priority for a VLAN
instance when the switch is operating in either the flat or 1x1 mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009