rmdir
Deletes an existing directory.
rmdir [path/]dir
Syntax Definitions
path
dir
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Be sure to separate path directories with a slash (/). Refer to the examples below.
•
Up to 255 characters may be used for the specified path.
•
This command can also be used on the secondary CMM.
Examples
-> rmdir ../working
-> rmdir flash/working
Release History
Release 6.6.1; command was introduced.
page 7-8
The path containing the directory to be removed. If no path is specified,
the command assumes the current path.
The name of the existing directory being removed. Up to thirty-two (32)
characters may be used (e.g., test_directory).
OmniSwitch 6250 CLI Reference Guide
File Management Commands
November 2009