Ntp Client - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

ntp client

Enables or disables NTP operation on the switch.
ntp client {enable | disable}
Syntax Definitions
enable
disable
Defaults
NTP protocol is disabled by default.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use this command to enable or disable NTP. Before NTP can be enabled, an NTP server must be speci-
fied using the ntp server
Examples
-> ntp client enable
-> ntp client disable
Release History
Release 6.6.1; command was introduced.
Related Commands
ntp server
MIB Objects
alaNtpEnable
page 5-6
Enables NTP.
Disables NTP.
command.
Specifies an NTP server from which the switch will receive updates.
Network Time Protocol Commands
OmniSwitch 6250 CLI Reference Guide November 2009