Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 711

Ethernet Port Commands
output definitions (continued)
Rx Alignments Err
Bytes Xmitted
Tx Unicast Frames
Tx Broadcast Frames
Tx M-cast Frames
Tx Undersize Frames
Tx Oversize Frames
Tx Lost Frames
Tx Collided Frames
Tx Error Frames
Release History
Release 6.6.1; command was introduced.
Related Commands
show interfaces accounting
show interfaces counters
show interfaces counters errors
show interfaces collisions
show interfaces status
show interfaces traffic
OmniSwitch 6250 CLI Reference Guide
Number of Alignments Error frames received.
Number of Bytes transmitted.
Number of unicast frames transmitted.
Number of broadcast frames transmitted.
Number of multicast frames r transmitted.
Number of undersized frames transmitted.
Number of oversized frames transmitted.
Number of Lost Frames transmitted.
Number of collision frames received or transmitted.
Number of error frames transmitted.
Displays interface accounting information (e.g., packets received/
transmitted).
Displays interface counter information (e.g., unicast packets
received/transmitted).
Displays interface error frame information (e.g., CRC errors, transit
errors, and receive errors).
Displays interface collision information (e.g., number of collisions
and number of retries).
Displays the interface line settings (e.g., speed and mode).
Displays interface traffic statistics (input/output bytes and packets).
November 2009 page 20-39