Lacp Agg Actor Admin Key - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Link Aggregation Commands

lacp agg actor admin key

Configures an actor administrative key for a port, which allows the port to join a dynamic aggregate
group.
lacp agg [ethernet | fastethernet | gigaethernet] slot/port actor admin key actor_admin_key
[actor admin state {[[no] active] [[no] timeout] [[no] aggregate] [[no] synchronize] [[no] collect]
[[no] distribute] [[no] default] [[no] expire] | none}]
[actor system id actor_system_id]
[actor system priority actor_system_priority]
[partner admin system id partner_admin_system_id]
[partner admin key partner_admin_key]
[partner admin system priority partner_admin_system_priority]
[partner admin state {[[no] active] [[no] timeout] [[no] aggregate] [[no] synchronize] [[no] collect]
[[no] distribute] [[no] default] [[no] expire] | none}]
[actor port priority actor_port_priority]
[partner admin port partner_admin_port]
[partner admin port priority partner_admin_port_priority]
lacp agg no [ethernet | fastethernet | gigaethernet] slot/port
Syntax Definitions
ethernet
fastethernet
gigaethernet
slot
port
actor_admin_key
actor admin state
actor_system_id
actor_system_priority
partner_admin_system_id
partner_admin_key
partner_admin_system_priority The priority of the remote system to which the dynamic aggregation
partner admin state
actor_port_priority
OmniSwitch 6250 CLI Reference Guide
Documents that the port is 10 Mbps Ethernet.
Documents that the port is 100 Mbps Fast Ethernet.
Documents that the port is Gigabit Ethernet.
The slot number for this aggregate.
The port that the switch will initially use as the Spanning Tree virtual
port for this aggregate.
The administrative key associated with this dynamic aggregate group.
Possible values are 0–65535.
See the lacp agg actor admin state command on page
The MAC address of this dynamic aggregate group on the switch.
The priority of the dynamic aggregate group. Possible values are
0–255.
The MAC address of the remote switch's dynamic aggregate group.
The administrative key for the dynamic aggregation group's remote
partner. Possible values are 0–65535.
group is attached. Possible values are 0–255.
See the lacp agg partner admin state command on page
The priority of the actor port. Possible values are 0–255.
November 2009
12-24.
12-30.
page 12-21