Show Interfaces Counters - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show interfaces counters

Displays interface counters information (e.g., unicast, broadcast, and multi-cast packets received/transmit-
ted).
show interfaces [slot[/port[-port2]]] counters
Syntax Definitions
slot
port
port2
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
If no slot/port numbers are entered, counter information for all slots/ports on the switch is displayed.
•
You can display a specific interface by entering the slot and port number (e.g., 3/1).
•
You can display a range of port numbers (e.g., 3/1-4).
•
You can display all interfaces in a slot by entering the slot number (e.g., 3).
•
These counters do not apply to Gigabit Ethernet traffic.
•
For combo ports configured as either forced fiber or preferred fiber statistics for the SFP fiber ports and
not the copper RJ-45 ports will be displayed. See the
more information.
•
For combo ports configured as either forced copper or preferred copper statistics for the copper RJ-45
ports and not the SFP fiber port will be displayed. See the
for more information.
page 20-50
Slot number you want to display.
Port number of the interface you want to display.
Last port number in a range of ports you want to display.
show interfaces hybrid counters
OmniSwitch 6250 CLI Reference Guide
Ethernet Port Commands
show interfaces hybrid counters
command for
command
November 2009