Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 522

Examples
-> bridge mode flat
-> bridge 1 4/1 mode forwarding
-> bridge mode 1x1
-> bridge 200 4/1 mode dynamic
-> bridge 300 1/24 mode forwarding
Release History
Release 6.6.1; command was introduced.
Related Commands
bridge mode
bridge cist slot/port mode
bridge 1x1 slot/port mode
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortManualMode
page 16-82
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Explicit command for configuring the Spanning Tree mode on a port or
an aggregate of ports for the CIST instance when the switch is operating
in either the 1x1 or flat mode.
Explicit command for configuring the Spanning Tree mode on a port or
an aggregate of ports for a VLAN instance when the switch is operating
in either the 1x1 or flat mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009