Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 384

output definitions (continued)
Number of Attached Ports
Primary Port
A dynamic aggregate group is specified:
-> show linkagg 2
Dynamic Aggregate
SNMP Id
Aggregate Number
SNMP Descriptor
Name
Admin State
Operational State
Aggregate Size
Number of Selected Ports : 0,
Number of Reserved Ports : 0,
Number of Attached Ports : 0,
Primary Port
LACP
MACAddress
Actor System Id
Actor System Priority
Actor Admin Key
Actor Oper Key
Partner System Id
Partner System Priority
Partner Admin Key
Partner Oper Key
Output fields are defined here:
output definitions
SNMP Id
Aggregate Number
SNMP Descriptor
Name
Admin State
Operational State
Aggregate Size
Number of Selected Ports
Number of Reserved Ports
Number of Attached Ports
page 12-46
The number of ports actually attached to this static aggregate group.
The port number of the first port to join this static aggregate group. If
the first port to join the aggregate is no longer part of the aggregate
group, the switch automatically assigns another port in the aggregate
group to be the primary port.
: 40000002,
: 2,
: Dynamic Aggregate Number 2 ref 40000002 size 4,
: AGG 2,
: ENABLED,
: DOWN,
: 4,
: NONE,
: [00:1f:cc:00:00:00],
: [00:20:da:81:d5:b0],
: 50,
: 120,
: 0,
: [00:20:da:81:d5:b1],
: 70,
: 220,
: 0
The SNMP ID associated with this dynamic aggregate group.
The group number of this dynamic aggregate group.
The standard MIB name for this dynamic aggregate group.
The name of this dynamic aggregate group. You can modify this param-
eter with the lacp linkagg name
The administrative state of this dynamic aggregate group, which can be
ENABLED or DISABLED. You can modify this parameter with the
lacp linkagg admin state
The operational state of this dynamic aggregate group, which can be
UP or DOWN.
The number of links configured for this dynamic aggregate group.
The number of ports available to this dynamic aggregate group.
The total number of ports reserved for use in link aggregation by this
dynamic aggregate group.
The number of ports actually attached to this dynamic aggregate group.
OmniSwitch 6250 CLI Reference Guide
Link Aggregation Commands
command (see page
command (see page 12-12).
12-11).
November 2009