Lacp Linkagg Name - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Link Aggregation Commands

lacp linkagg name

Configures a name for a dynamic aggregate group.
lacp linkagg agg_num name name
lacp linkagg agg_num no name
Syntax Definitions
agg_num
name
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of this command to remove a name from a dynamic aggregate group.
Examples
-> lacp linkagg 2 name finance
-> lacp linkagg 2 no name
Release History
Release 6.6.1; command was introduced.
Related Commands
lacp linkagg size
show linkagg
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggName
OmniSwitch 6250 CLI Reference Guide
The number corresponding to the dynamic aggregate group.
The name of the dynamic aggregate group. May be any alphanumeric
string up to 255 characters long. Spaces must be contained within
quotes (e.g., "Dynamic Group 1").
Creates a dynamic aggregate group.
Displays information about static and dynamic (LACP) aggregate
groups.
November 2009 page 12-11