Http Server - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

http server

Enables/disables web management on the switch. When enabled, a user is able to configure the switch
using the WebView application.
{[ip] http | https} server
no {[ip] http | https} server
Syntax Definitions
ip
Defaults
Web management is enabled by default.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of this command to disable web management. If web management is disabled, you will
not be able to access the switch using WebView.
Examples
-> http server
-> no http server
-> https server
-> no https server
Release History
Release 6.6.1; command was introduced.
Related Commands
http ssl
debug http sessiondb
show http
MIB Objects
alaIND1WebMgtConfigMIBGroup
alaInd1WebMgtAdminStatus
page 8-2
Optional syntax. Using this optional syntax is the same as using the http
server command.
Enables/disables SSL on the switch.
Displays web management session information.
Displays web management configuration information.
OmniSwitch 6250 CLI Reference Guide
Web Management Commands
November 2009