802.1Ab Commands; Lldp Transmit Interval - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

lldp transmit interval

Sets the transmit time interval for LLDPDUs.
lldp transmit interval seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The LLDP protocol must be enabled before using this command.
Examples
-> lldp transmit interval 40
Release History
Release 6.6.1; command was introduced.
Related Commands
lldp transmit hold-multiplier
show lldp local -system
MIB Objects
lldpConfiguration
lldpMessageTxInterval
page 13-2
The transmit interval between LLDPDUs, in seconds. The valid range is
5 - 32768.
default
30
Sets the transmit hold multiplier value, which is used to calculate the
Time To Live TLV.
Displays local system information.
OmniSwitch 6250 CLI Reference Guide

802.1AB Commands

November 2009