Snmp Trap Absorption - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

snmp trap absorption

Enables or disables the trap absorption function.
snmp trap absorption {enable | disable}
Syntax Definitions
enable
disable
Defaults
By default, trap absorption is enabled.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
To view the current trap absorption status, use the show snmp trap config command.
Examples
-> snmp trap absorption enable
-> snmp trap absorption disable
Release History
Release 6.6.1; command was introduced.
Related Commands
show snmp trap config
MIB Objects
trapFilterTable
trapAbsorption
page 10-18
Enables SNMP trap absorption. When trap absorption is enabled,
identical, repetitive traps sent by applications during a pre-configured
time period will be absorbed, and therefore not sent to SNMP Manager
stations configured on the switch.
Disables SNMP trap absorption.
Displays the SNMP trap information. Information includes trap ID num-
bers and corresponding trap names and families.
OmniSwitch 6250 CLI Reference Guide
SNMP Commands
November 2009