Show Ethoam Domain - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Ethernet OAM Commands

show ethoam domain

Displays the information of a specific Management Domain configured on the bridge.
show ethoam domain {domain_name | mac_address}
Syntax Definitions
domain_name
mac_address
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show ethoam domain esd.alcatel-lucent.com
MD Attributes
MD-Level : level-3,
MD-MHFstatus : mhfNone
Maintenance Association : alcatel-sales
Vlan : 100,
MA-MHFstatus : mhfNone,
CCM-interval : interval10s,
MEP-List(MEP-Id) : 3 4
Total number of MAs configured in this MD = 1
output definitions
MD-level
MD-MHFstatus
Maintenance Association
Vlan
MA-MHFstatus
CCM-interval
MEP-Id
OmniSwitch 6250 CLI Reference Guide
Specifies the domain name.
Specifies the CFM system MAC address.
The level at which the MD was created.
Indicates whether the maintenance entity can create MHFs for this MD.
Options include none, explicit, or default.
The name of the maintenance association.
The VLAN ID monitored by this MA. If the MA is not attached to any
VLAN, 0 will be displayed.
Indicates whether the maintenance entity can create MHFs for this MA.
Options include none, explicit, or default.
The interval between the CCM transmissions.
Indicates the Maintenance End Point.
November 2009 page 25-37