Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 500

Related Commands
bridge mode
bridge cist slot/port priority
bridge msti slot/port priority
bridge 1x1 slot/port priority
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortPriority
page 16-60
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Explicit command for configuring the Spanning Tree priority for a port
or an aggregate of ports for the CIST instance when the switch is operat-
ing in either the 1x1 or flat mode.
Explicit command for configuring the Spanning Tree priority for a port
or an aggregate of ports for an MSTI when the switch is operating in
either the 1x1 or flat mode.
Explicit command for configuring the Spanning Tree priority for a port
or an aggregate of ports for a VLAN instance when the switch is operat-
ing in either the 1x1 or flat mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009