lldp transmit delay
Sets the minimum time interval between successive LLDPDUs transmitted.
lldp transmit delay seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The LLDP protocol must be enabled before using this command.
•
The transmit delay is less than or equal to the multiplication of transmit interval and 0.25 (transmit
interval * 0.25).
Examples
-> lldp transmit delay 20
Release History
Release 6.6.1; command was introduced.
Related Commands
lldp transmit interval
show lldp local -system
MIB Objects
lldpConfiguration
lldpTxDelay
page 13-4
The time interval between successive LLDPDUs transmitted, in
seconds. The valid range is 1-8192.
default
2
Sets the transmit time interval for LLDPDUs.
Displays local system information.
OmniSwitch 6250 CLI Reference Guide
802.1AB Commands
November 2009