Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 385

Link Aggregation Commands
output definitions (continued)
Primary Port
MACAddress
Actor System Id
Actor System Priority
Actor Admin Key
Actor Oper Key
Partner System Id
Partner System Priority
Partner Admin Key
Partner Oper Key
Release History
Release 6.6.1; command was introduced.
Related Commands
static linkagg size
lacp linkagg size
OmniSwitch 6250 CLI Reference Guide
The port number of the first port to join this dynamic aggregate group.
If the first port to join the aggregate group is no longer part of the
aggregate group, the switch automatically assigns another port in the
aggregate group to be the primary port.
The MAC address associated with the primary port.
The MAC address of this dynamic aggregate group. You can modify
this parameter with the
page 12-16).
The priority of this dynamic aggregate group. You can modify this
parameter with the lacp linkagg actor system priority
page 12-15).
The administrative key associated with this dynamic aggregate group.
You can modify this parameter with the
command (see page 12-14).
The operational key associated with this dynamic aggregate group.
The MAC address of the remote dynamic aggregate group. You can
modify this parameter with the
mand (see page 12-17).
The priority of the remote system to which this dynamic aggregation
group is attached. You can modify this parameter with the
partner system priority
The administrative key for this dynamic aggregation group's remote
partner. You can modify this parameter with the
admin key command (see
The operational key of the remote system to which the dynamic aggre-
gation group is attached.
Creates a static aggregate group.
Creates a dynamic aggregate group.
November 2009
lacp linkagg actor system id
lacp linkagg actor admin key
lacp linkagg partner system id
command (see page 12-19).
page 12-20).
command (see
command (see
com-
lacp linkagg
lacp linkagg partner
page 12-47