Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 986

Hide thumbs Also See for OmniSwitch 6250:

Table of Contents

Usage Guidelines

The command can be issued in any order like window, threshold, and notify. However, at least one

option needs to be entered.

To enter many ports in a single command, use a hyphen to specify a range of ports (e.g. 3/1-16).

-> efm-oam port 1/1 errored-frame-period threshold 1 window 3000000 notify enable

-> efm-oam port 1/1 errored-frame-period notify disable

-> efm-oam port 2/1-4 errored-frame-period threshold 1 window 3000000 notify enable

-> efm-oam port 2/1-2 errored-frame-period notify disable

Release History

Release 6.6.1; command was introduced.

Related Commands

efm-oam errored-frame

efm-oam errored-frame-

seconds-summary

show efm-oam port detail

dot3OamEventConfigTable

dot3OamErrFramePeriodWindow

dot3OamErrFramePeriodThreshold

dot3OamErrFramePeriodEvNotifEnable

Configures the threshold, window and notify-status for errored-

frame on a port. The frame-period measures the frame-errors,

within a specified window of time.

Configures the threshold, window and notify-status for errored-

frame-seconds-summary on a port. The Errored Seconds are the

time in seconds in which at least one frame error has occurred.

Displays the Errored Frame Period Event threshold, window, and

notification parameter values for a port.

OmniSwitch 6250 CLI Reference Guide

LINK OAM Commands

November 2009