Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 383

Link Aggregation Commands
output definitions (continued)
Admin State
Oper State
Att Ports
Sel Ports
A static aggregate is specified:
-> show linkagg 5
Static Aggregate
SNMP Id
Aggregate Number
SNMP Descriptor
Name
Admin State
Operational State
Aggregate Size
Number of Selected Ports : 0,
Number of Reserved Ports : 0,
Number of Attached Ports : 0,
Primary Port
Output fields are defined here:
output definitions
SNMP Id
Aggregate Number
SNMP Descriptor
Name
Admin State
Operational State
Aggregate Size
Number of Selected Ports
Number of Reserved Ports
OmniSwitch 6250 CLI Reference Guide
The current administrative state of the aggregate group, which can be
ENABLED or DISABLED. You can modify this parameter with the
static linkagg admin state
gate groups and with the
12-12) for dynamic aggregate groups.
The current operational state of the aggregate group, which can be UP
or DOWN.
The number of ports actually attached to this aggregate group.
The number of ports that could possibly attach to the aggregate group.
: 40000005,
: 5,
: Omnichannel Aggregate Number 5 ref 40000005 size 2,
: AGG5,
: ENABLED,
: DOWN,
: 2,
: NONE
The SNMP ID associated with this static aggregate group.
The group number.
The standard MIB name for this static aggregate group.
The name of this static aggregate group. You can modify this parameter
with the static linkagg name
The administrative state of this static aggregate group, which can be
ENABLED or DISABLED. You can modify this parameter with the
static linkagg admin state
The operational state of this static aggregate group, which can be UP or
DOWN.
The number of links configured for this static aggregate group.
The number of ports that could possibly attach to this static aggregate
group.
The total number of ports reserved for use in link aggregation by this
static aggregate group. (Note: This field is not relevant for static aggre-
gate groups.)
November 2009
command (see page 12-6) for static aggre-
lacp linkagg admin state
command (see page
command (see page 12-6).
command (see page
12-5).
page 12-45