Power over Ethernet (PoE) Commands
lanpower combo-port
Enables or disables PoE capability on the copper combo ports.
lanpower slot combo-port {enable | disable}
Syntax Definitions
slot
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6250-Enterprise Models
Usage Guidelines
Port pairs 23/24 and 25/26 cannot have PoE enabled at the same time. Use this command to choose which
port pairs will support PoE.
Examples
-> lanpower 1 combo-port enable
Release History
Release 6.6.1; command was introduced.
Related Commands
show lanpower
MIB Objects
OmniSwitch 6250 CLI Reference Guide
The particular slot on which to enable or disable PoE capability on the
copper combo ports.
Enables PoE capability on the copper combo ports 25/26 and disables
PoE capability on ports 23/24.
Disables PoE capability on the copper combo ports 25/26 and enables
PoE capability on ports 23/24.
default
disable
Displays current inline power status and related statistics for
all PoE ports in a specified slot.
November 2009
page 4-13