Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 466

Examples
-> bridge mode flat
-> bridge msti 2 priority 4096
-> bridge msti 10 priority 53800
ERROR: Valid bridge priority values are multiples of 4096: 0, 4096,
8192, 12288, 16384 ... 61440
-> bridge mode 1x1
-> bridge msti 2 priority 61440
-> bridge msti 10 priority 12288
Release History
Release 6.6.1; command was introduced.
Related Commands
bridge mode
bridge priority
bridge cist priority
bridge 1x1 priority
MIB Objects
vStpInsTable
vStpInsMstiNumber
vStpInsMode
vStpInsPriority
vStpInsBridgeAddress
page 16-26
Selects a flat Spanning Tree or 1x1 (per VLAN) Spanning Tree operat-
ing mode for the switch.
Implicit command for changing the Spanning Tree priority for the flat
mode CIST instance or a 1x1 mode VLAN instance.
Explicit command for changing the Spanning Tree priority for the CIST
instance when the switch is operating in either the flat or 1x1 mode.
Explicit command for changing the Spanning Tree priority for a VLAN
instance when the switch is operating in either the flat or 1x1 mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009