Show Gvrp Statistics - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show gvrp statistics

Displays the GVRP statistics for all the ports, an aggregate of ports, or a specific port.
show gvrp statistics [linkagg agg_num | port slot/port]
Syntax Definitions
agg_num
slot/port
Defaults
By default, the GVRP statistics are displayed for all ports.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the agg_num or slot/port parameter with this command to display GVRP statistics for a specific port.
Examples
-> show gvrp statistics port 1/21
Port 1/21:
Join Empty Received
Join In Received
Empty Received
Leave Empty Received
Leave In Received
Leave All Received
Join Empty Transmitted
Join In Transmitted
Empty Transmitted
Leave Empty Transmitted : 0,
Leave In Transmitted
Leave All Transmitted
Failed Registrations
Garp PDU Received
Garp PDU Transmitted
Garp Msgs Received
Garp Msgs Transmitted
Invalid Msgs Received
-> show gvrp statistics
Port 1/1:
Join Empty Received
Join In Received
Empty Received
Leave Empty Received
page 23-20
The number corresponding to the aggregate group.
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
: 8290,
: 1526,
: 0,
: 1,
: 0,
: 283,
: 826,
: 1532,
: 39,
: 0,
: 296,
: 0,
: 1160,
: 957,
: 10100,
: 2693,
: 0
: 0,
: 0,
: 0,
: 0,
OmniSwitch 6250 CLI Reference Guide
GVRP Commands
November 2009