Show 802.1Q - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show 802.1q

Displays 802.1Q tagging information for a single port or an aggregate of ports.
show 802.1q {slot/port | aggregate_id}
Syntax Definitions
slot
port
aggregate_id
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show 802.1q 3/4
Acceptable Frame Type
Force Tag Internal
Tagged VLANS
-------------+-------------------------------------------------+
2
-> show 802.1q 2
Tagged VLANS
-------------+-------------------------------------------------+
3
Output fields are described here:
output definitions
Acceptable Frame Type
Force Tag Internal
page 15-6
The slot number to display 802.1Q tagging.
The port number to display 802.1Q tagging.
The link aggregation ID to display 802.1Q tagging. See
"Link Aggregation Commands"
tion.
: Any Frame Type
:
Internal Description
TAG PORT 3/4 VLAN 2
Internal Description
TAG AGGREGATE 2 VLAN 3
The acceptable frame type for this port, which can be Any Frame
Type or Tagged Only Frame Type.
This field displays if adding the default VLAN ID (VID) to tagged
frames is turned on or off.
for more information on link aggrega-
off
OmniSwitch 6250 CLI Reference Guide
802.1Q Commands
Chapter 12,
November 2009