Static Linkagg Admin State - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

static linkagg admin state

Configures the administrative state (whether the static aggregate group is active or inactive) of a static
aggregate group.
static linkagg agg_num admin state {enable | disable}
Syntax Definitions
agg_num
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6250
Usage Guidelines
When the administrative state is set to disable, the static aggregate group is disabled.
Examples
-> static linkagg 2 admin state disable
Release History
Release 6.6.1; command was introduced.
Related Commands
static linkagg size
show linkagg
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggAdminState
page 12-6
The number corresponding to the static aggregate group.
Specifies that the static aggregate group is active and is able to aggre-
gate links.
Specifies that the static aggregate group is inactive and not able to
aggregate links.
default
enable
Creates a static aggregate group.
Displays information about static and dynamic (LACP) aggregate
groups.
OmniSwitch 6250 CLI Reference Guide
Link Aggregation Commands
November 2009