Show Vlan Ipmvlan - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

VLAN Management Commands

show vlan ipmvlan

Displays IPMVLAN information for a specific IPMVLAN, a range of IPMVLANs, or all the IPMVLANs.
show vlan ipmvlan [ipmvlan-id | ipmvlan-id1-ipmvlan-id2]
Syntax Definitions
ipmvlan-id
ipmvlan-id1-ipmvlan-id2
Defaults
By default, the details of all the IPMVLANs will be displayed.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the ipmvlan-id parameter with this command to display details of a specific IPMVLAN.
•
Use the ipmvlan-id1-ipmvlan-id2 parameter with this command to display details of a range of
IPMVLANs.
Examples
-> show vlan ipmvlan
vlan type
------+------------+-------+--------+--------------+--------------
1201 Vstk ipmtv
1202 Vstk ipmtv
1203 Entp ipmtv
1204 Vstk ipmtv
1205 Entp ipmtv
-> show vlan ipmvlan 1201-1203
vlan type
------+------------+-------+--------+--------------+--------------
1201 Vstk ipmtv
1202 Vstk ipmtv
1203 Entp ipmtv
-> show vlan ipmvlan 50
Name
IPMV Mode
Administrative State: enabled,
Operational State
OmniSwitch 6250 CLI Reference Guide
Specifies the IP Multicast VLAN number. The valid range is 2–4094.
Specifies the range of the IP Multicast VLAN numbers.
stree
admin oper 1x1
on on on
on on off
on on off
on on on
on off on
stree
admin oper 1x1
on on on
on on off
on on off
: VLAN 50,
: Enterprise IPMVLAN
: disabled,
November 2009
flat name
on VLAN 1201
off VLAN 1202
off VLAN 1203
on VLAN 1204
off VLAN 1205
flat name
on VLAN 1201
off VLAN 1202
off VLAN 1203
page 22-23