Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 609

Distributed Spanning Tree Commands
output definitions
Connection Type
Edge Port
Boundary Port
MST
Role
State
Pth Cst
Vlans
Release History
Release 6.6.1; command was introduced.
Related Commands
show spantree cist ports
show spantree msti ports
show spantree 1x1 ports
MIB Objects
vStpInsPortTable
vStpInsPortAdminConnectionType
vStpInsPortAdminEdge
vStpInsPortAutoEdge
vStpMstInstanceNumber
vStpInsPortRole
vStpInsPortState
vStpInsPortPathCost
vStpMstVlanAssignmentTable
vStpMstVlanAssignmentVlanNumber
OmniSwitch 6250 CLI Reference Guide
Operational connection type: PTP, NPT, NS (nonsignificant) or EDG.
Shows the current operational state of the port's connection type. See
the bridge slot/port connection
information.
Indicates whether or not the port is an edge port (YES or NO).
Indicates whether or not the port is a boundary port (YES or NO). A
boundary port connects an MST bridge to a LAN that belongs to a dif-
ferent MST region.
The Multiple Spanning Tree Instance (MSTI) number that is associated
with this port.
The role of the port for this Spanning Tree instance. Possible port roles
are: root, designated, alternate, master, and backup.
The port operational state as defined by application of the Spanning
Tree Protocol. Possible port operational states include: disabled, block-
ing, listening, learning, and forwarding.
The contribution of this port to the path cost towards the Spanning Tree
root bridge that includes this port. Path cost is a measure of the distance
of the listed port from the root bridge in the number of hops.
The VLAN ID of the default VLAN for the port.
Displays Spanning Tree port information for the flat mode Common
and Internal Spanning Tree (CIST) instance.
Displays Spanning Tree port information for a flat mode Multiple
Spanning Tree Instance (MSTI).
Displays Spanning Tree port information for a 1x1 mode VLAN
instance.
November 2009
command on page 16-87 for more
page 16-169