Show Ethernet-Service Port - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

VLAN Stacking Commands

show ethernet-service port

Displays configuration information for a VLAN Stacking service port.
show ethernet-services port {slot/port | linkagg agg_num}
Syntax Definitions
slot/port
agg_num
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
Specifying a slot/port or link aggregate ID number is required with this command.
Examples
-> show ethernet-service port 1/10
Interface : 1/10
Port Type : UNI
UNI Profile
Default SVLAN : 4095
Service Name : ipmv_service
IPMVLAN : 40
NNI(s) : No NNIs configured
SAP Id : 2
UNIs
CVLAN(s)
sap-profile : translate_profile
Service Name : svlan_service
SVLAN : 20
NNI(s) : No NNIs configured
SAP Id : 1
UNIs
CVLAN(s)
sap-profile : translate_profile
OmniSwitch CLI Reference Guide
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The link aggregate ID number (0–31).
: default-uni-profile
: 1/10
: 100
: 1/10
: 200
November 2009 page 24-37