Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 416

output definitions (continued)
LLDPDU Transmit Delay
Reintialization Delay
MIB Notification Interval
Management Address Type
Management IP Address
Release History
Release 6.6.1; command was introduced.
Related Commands
lldp reinit delay
lldp transmit hold-multiplier
lldp transmit delay
MIB Objects
lldpLocalSystemData
lldpLocChassisIdSubtype
lldpLocChassisId
lldpLocSysName
lldpLocSysDesc
lldpLocSysCapSupported
lldpLocSysEnabled
lldpPortConfigTable
lldpMessageTxInterval
lldpMessageTXHoldMultiplier
lldpTxDelay
lldpReinitDelay
lldpNotificationInterval
lldpLocManAddrTable
lldpLocManAddrSubtype
lldpLocManAddr
page 13-24
The minimum transmit time between successive LLDPDUs.
The minimum time interval before the reinitialization of local port
objects between port status changes.
The minimum time interval between consecutive notifications of local
system MIB change.
The type of management address used in LLDPDU.
The management IP address. The loopback0 IP address is configured
for the management IP address to be transmitted.
Sets the time interval that must elapse before the current status of a port
is reinitialized after a status change.
Sets the transmit hold multiplier value, which is used to calculate the
Time To Live TLV.
Sets the minimum time interval between successive LLDPDUs trans-
mitted.
OmniSwitch 6250 CLI Reference Guide
802.1AB Commands
November 2009