Show Snmp Station - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

SNMP Commands

show snmp station

Displays the current SNMP station status.
show snmp station
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show snmp station
ipAddress/udpPort
---------------------------------------------------+---------+--------+------
172.21.160.32/4000
172.21.160.12/5000
0300:0000:0000:0000:0211:d8ff:fe47:470b/4001
0300:0000:0000:0000:0211:d8ff:fe47:470c/5001
output definitions
IPAddress
UDP Port
Status
Protocol
User
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
IP Address of the SNMP management station that replayed the trap.
UDP port number.
The Enabled/Disabled status of the SNMP management station.
The version of SNMP set for this management station.
The user account name.
November 2009
status protocol user
enable v3 abc
enable v3 user1
enable v3 user2
enable v2 abc
page 10-5