Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 741

Ethernet Port Commands
output definitions (continued)
Rx Lost Frames
Rx Error Frames
Rx CRC Error Frames
Rx Alignments Err
Bytes Xmitted
Tx Unicast Frames
Tx Broadcast Frames
Tx M-cast Frames
Tx Undersize Frames
Tx Oversize Frames
Tx Lost Frames
Tx Collided Frames
Tx Error Frames
Release History
Release 6.6.1; command was introduced.
Related Commands
show interfaces hybrid
accounting
show interfaces hybrid counters
show interfaces hybrid counters
errors
show interfaces hybrid
collisions
show interfaces hybrid status
show interfaces hybrid traffic
OmniSwitch 6250 CLI Reference Guide
Number of Lost Frames received.
Number of error frames received.
Number of CRC error frames received.
Number of Alignments Error frames received.
Number of Bytes transmitted.
Number of unicast frames transmitted.
Number of broadcast frames transmitted.
Number of multicast frames r transmitted.
Number of undersized frames transmitted.
Number of oversized frames transmitted.
Number of Lost Frames transmitted.
Number of collision frames received or transmitted.
Number of error frames transmitted.
Displays interface accounting information (e.g., packets received/
transmitted) for combo ports.
Displays interface counter information (e.g., unicast packets
received/transmitted) for combo ports.
Displays interface error frame information (e.g., CRC errors, transit
errors, receive errors) for combo ports.
Displays interface collision information (e.g., number of collisions,
number of retries) for combo ports.
Displays the interface line settings (e.g., speed, mode) for combo
ports.
Displays interface traffic statistics (input/output bytes and packets)
for combo ports.
November 2009 page 20-69