Ssh6 - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

ssh6

Invokes Secure Shellv6 on the switch. Secure Shellv6 is used to make a secured connection to an SSHv6
server.
ssh6 {ipv6_address | hostname} [if_name]
Syntax Definitions
ipv6_address
hostname
if_name
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
You must have a valid username and password for the specified host.
•
If the session is invoked using the server's link-local address, the source interface name must be
provided.
•
You can establish up to 1 SSH6 sessions from an OmniSwitch (when it acts as Client) and up to 8
SSH6 sessions towards an OmniSwitch (when it acts as Server).
•
A console or a telnet session can handle only one SSHv6 client session
•
At anytime, there can be only a single SSH client session (either SSHv4 or SSHv6) to any SSH server.
Examples
-> ssh6 fe80::a00:20ff:fea8:8961 int1
-> ssh6 ::1
-> ssh6 Sun.com
Release History
Release 6.6.1; command was introduced.
page 6-44
Specifies the IPv6 address for Secure Shell.
Specifies the host name for Secure Shell.
The name of the interface used to reach the sshv6 server, if the target
has been specified using the link-local address.
OmniSwitch 6250 CLI Reference Guide
Session Management Commands
November 2009