Show Vlan Gvrp - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show vlan gvrp

Displays a list of VLANs learned through GVRP and their details.
show vlan gvrp [vlan-id | vlan-range]
Syntax Definitions
vlan-id
vlan-range
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the vlan-id or vlan-range parameter with this command to display the details for a specific VLAN(s).
Examples
-> show vlan gvrp
vlan type admin oper
----+-----+-----+----+-----+--------+-------+------+-----+--------------
5 gvrp on
6 gvrp on
output definitions
vlan
type
admin
oper
page 22-20
VLAN ID number you want to display (1–4094).
The VLAN ID range (e.g., 1-10).
stree
1x1 flat
on on on
on off off
The numerical VLAN ID. Use the
VLANs.
The type of VLAN (std, vstk, gvrp, or ipmv)
VLAN administrative status: on enables VLAN functions to operate;
off disables VLAN functions without deleting the VLAN. Use the
command to change the VLAN administrative status.
VLAN operational status: on (enabled) or off (disabled). The opera-
tional status remains disabled until an active port is assigned to the
VLAN. When the operational status is enabled, then VLAN properties
(e.g. router interfaces, Spanning Tree) are applied to ports and traffic
flow. A VLAN must have an enabled administrative status before it can
become operationally enabled.
mble
auth ip tag
off NA off GVRP1
off NA off
vlan
OmniSwitch 6250 CLI Reference Guide
VLAN Management Commands
name
GVRP12
command to create or remove
November 2009
vlan