Show Bridge Rrstp Ring - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Distributed Spanning Tree Commands

show bridge rrstp ring

Displays information for all the rings or for a specific ring present in the system.
show bridge rrstp ring [ring_id]
Syntax Definitions
ring_id
Defaults
By default displays information for all rings.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the ring_id parameter with this command to display information for a specific ring.
Examples
-> show bridge rrstp ring
RingId
-----------+------------+---------------+--------------+---------------
2
6
128
output definitions
RingId
Vlan-Tag
Ring-Port-1
Ring-Port-2
Ring Status
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
An existing ring ID number (1–128).
Vlan-Tag Ring-Port1
1000 1/19
20 1/1
1 0/1
The numeric ID of the RRSTP ring.
The VLAN to which the RRSTP ring frames are tagged.
The first port in the RRSTP ring.
The second port in the RRSTP ring.
The current state of the RRSTP ring (Enabled or Disabled).
November 2009
Ring-Port2 Ring Status
1/10 enabled
1/8 disabled
0/31 enabled
page 16-171