Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 470

Release History
Release 6.6.1; command was introduced.
Related Commands
bridge mode
bridge cist hello time
bridge 1x1 hello time
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsMode
vStpInsBridgeHelloTime
page 16-30
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Explicit command for changing the Spanning Tree hello time value for
the CIST instance when the switch is operating in either the flat or 1x1
mode.
Explicit command for changing the Spanning Tree hello time value for a
VLAN instance when the switch is operating in either the flat or 1x1
mode.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009