Loopback-Detection - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

loopback-detection

Enables or disables Loopback Detection (LBD) globally on the switch.
loopback-detection {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
•
LBD can be enabled globally and per port without any dependency but loopback-detection will be
operational only if LBD is enabled globally and also on the specific port.
•
LBD can be configured for a port and the configuration can be applied and retained, whether or not
LBD is enabled globally. However, LBD functionality on a port is available only when LBD is enabled
globally on the switch.
Examples
-> loopback-detection enable
Release History
Release 6.6.1; command was introduced.
Related Commands
loopback-detection port
show loopback-detection
MIB Objects
alaLdbConfigTable
alaLdbGLobalConfigStatus
page 17-2
Enables LBD on the switch.
Disables LBD on the switch.
default
disable
Enables or disables LBD on a specific port.
Displays LBD configuration information.
OmniSwitch 6250 CLI Reference Guide
Loopback Detection Commands
November 2009