Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 653

Learned Port Security Commands
Examples
-> port-security shutdown 25
-> port-security shutdown 60
-> port-security shutdown 2 convert-to-static enable
-> port-security shutdown 2 convert-to-static disable
Release History
Release 6.6.1; command was introduced.
Related Commands
port-security
port-security mac
port-security mac-range
port-security maximum
port-security violation
MIB Objects
learnedPortSecurityGlobalGroup
lpsLearningWindowTime
lpsLearningWindowTimeWithStaticConversion
OmniSwitch 6250 CLI Reference Guide
Enables or disables Learned Port Security (LPS) on the switch port(s).
Configures a single authorized source MAC address for a port that
belongs to a specified VLAN.
Configures a list of authorized MAC addresses by defining a range of
addresses allowed on the port.
Specifies the maximum number of source MAC addresses that an LPS
port(s) is allowed to learn.
Selects the method for handling traffic that does not comply with LPS
restrictions for the specified port.
November 2009 page 19-5