Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 498

Examples
-> bridge mode flat
-> bridge 1x1 2 4/1 enable
-> bridge 1x1 3 16 disable
-> bridge mode 1x1
-> bridge 1x1 2 5/10 enable
-> bridge 1x1 3 22 disable
Release History
Release 6.6.1; command was introduced.
Related Commands
bridge mode
bridge slot/port
bridge cist slot/port
vlan stp
bridge bpdu-switching
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortEnable
page 16-58
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for configuring the Spanning Tree status on a port for
the flat mode CIST instance or for a 1x1 mode VLAN instance.
Explicit command for configuring the Spanning Tree status on a port or
an aggregate of ports for the CIST instance when the switch is operating
in either the 1x1 or flat mode.
Enables or disables Spanning Tree instance for the specified VLAN.
Enables or disables BPDU switching for the specified VLAN.
OmniSwitch 6250 CLI Reference Guide
Distributed Spanning Tree Commands
November 2009