Show Lanpower - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show lanpower

Displays current inline power status and related statistics for all PoE ports in a specified slot.
show lanpower slot
Syntax Definitions
slot
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Enterprise Models
Usage Guidelines
N/A
Examples
-> show lanpower 1
Port Maximum(mW) Actual Used(mW)
----+-----------+---------------+-----------+---------+------+-------
1 31000
2 31000
3 31000
4 31000
5 31000
6 31000
7 16000
(Output truncated)
22 16000
23 31000
24 31000
Slot 1 Max Watts 225
1 Power Supplies Available
output definitions
Port
Maximum (mW)
Actual Used (mW)
page 4-14
The slot for which current inline power status and related statistics are to
be displayed.
Status
0 Undefined
0 Undefined
0 Undefined
0 Undefined
0 Undefined
0 Undefined
0 Undefined
0 Undefined
0 Undefined
0 Undefined
A PoE port for which current status and related statistics are being
displayed.
The current maximum amount of power allocated to the corresponding
PoE port, in milliwatts. The default value is 15400. To change this set-
ting, use the lanpower power
The actual amount of power being used by an attached device (if appli-
cable), in milliwatts. If no device is attached to the corresponding port,
this row displays a value of 0.
OmniSwitch 6250 CLI Reference Guide
Power over Ethernet (PoE) Commands
Priority On/Off Class
Low OFF
Low OFF
Low OFF
Low OFF
Low OFF
Low OFF
Low OFF
Low OFF
Low OFF
Low OFF
command.
-
-
-
-
-
-
-
-
-
-
November 2009