Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 599

Distributed Spanning Tree Commands
output definitions (continued)
Man. Mode
Config Cost
Adm Cnx
Adm Edg
Aut Edg
Rstr Tcn
Rstr Role/Root Guard
OS8800 10G Opt.
PVST+ Cfg
PVST+ Stat
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
The manual mode setting for the port: yes indicates that the blocking or
forwarding state of the port was manually set and the port does not par-
ticipate in the Spanning Tree Algorithm; no indicates that the Spanning
Tree Algorithm is managing the port state. Configured through the
bridge slot/port mode command.
The configured path cost value for this port. Configured through the
bridge 1x1 slot/port path cost
The administrative connection type: PTP, NPT, or AUT. Configured
through the bridge slot/port connection
The edge port administrative status: yes indicates that the port is an
admin edge port; no indicates that the port is not an admin edge port.
Configured through the bridge slot/port connection
The edge port automatic status: yes indicates that the port is an auto-
matic edge port; no indicates that the port is not an automatic edge port.
Configured through the bridge cist slot/port auto-edge
slot/port auto-edge command.
The restricted TCN capability: yes indicates that the port supports the
restricted TCN capability; no indicates that the port does not support
the restricted TCN capability. Configured through the
port restricted-tcn or bridge 1x1 slot/port restricted-tcn
The restricted status of the port: Yes indicates that the port is restricted
from becoming the root; No indicates that the port is not restricted from
becoming the root. Configured through the
restricted-role or bridge 1x1 slot/port restricted-role
N/A
The type of BPDU used on the port: AUTO indicates that IEEE
BPDUs are used until a PVST+ BPDU is detected; ENA indicates
that PVST+ BPDUs are used; DIS indicates that IEEE BPDUs are
used. Configured through the
Indicates whether or not the PVST+ interoperability status is enabled
(ENA) or disabled (DIS) for the port. Configured throught the
mode 1x1 pvst+ command.
November 2009
command.
command.
command.
bridge cist slot/
bridge cist slot/port
bridge port pvst+ command.
or bridge 1x1
command.
command.
bridge
page 16-159